PRODUCTS

  • TV releaser
     
     

    Dissolved Air Flotation Clean Water Act is the dissolved air pressure generated by the system dissolved gas and water, the releaser released a large amount of fine bubbles introducing water to be treated. Use air bubbles adhere to the solid impurities buoyancy, to solid, liquid rapid separation and increase the degree of enrichment scum purpose. Therefore, water is considered a technological breakthrough lies, dissolved gas releaser is dissolved air flotation water purification systems critical devices. Pressure dissolved gas and water only through the energy dissipation of the set down, to release a large number of fine bubbles, releaser performance is good or bad, related to the fine of the bubble, which directly affects air flotation effect of water.

    TV releaser TS is the second type, after TJ releaser latest development of the third generation of dissolved gas releaser, which is based on the existing releaser, combined with the successful development of the principle of vibration. It absorbed the excellent performance of TS, TJ releaser of, but also improves the releaser released water distribution uniformity. Increasing the chances of micro-bubbles and impurities in the water to be treated collision adhesion, thereby further improving the flotation water purification effect. In addition, releaser is blocked as soon as, just outside the flotation tank vent valve was opened, compressed air supply is turned on, you can use water containing dissolved gas releaser within the block was clean. This overcomes the TS-type dissolved gas releaser easy to block ills. At the same time, than TJ type dissolved gas releaser saving vacuum devices.

    Main feature:

    1, the pressure must first total dissolved gas and water, rinse manifold, the release can be installed TJ type dissolved gas releaser

    2, the average diameter of the bubbles released only 20 to 30 microns.

    3, regardless of dress or flip releaser, Water injector and the control gate are adapted to be attached at the ease of operation.

    Basic parameters and key performance indicators:

    Model

    Specification

    Then vacuum diameter (when)

    Different flow under pressure (m3 / h)

    Role diameter (cm)

    Fifteen

    2.0

    2.5

    3.0

    3.5

    4.0

    Forty five

    5.0

    TV-Ⅰ

    ¢ 15

    25

    0.95

    1.04

    1.13

    1.22

    1.31

    1.4

    1.48

    1.51

    40

    TV-Ⅱ

    ¢ 20

    25

    2

    2.16

    2/32

    2.48

    2.64

    2.8

    2.96

    3.12

    60

    TV-Ⅲ

    ¢ 25

    40

    4.08

    4.45

    4.81

    5.18

    5.54

    5.91

    6.18

    6.64

    80

    Installation Notes: 
    The releaser been able blockades, but after the elimination of coarse impurities can still be used to this end: 
    1. First, total dissolved gas and water pressure, the branch pipe to clean the impurities, the best use of gas, water mixing repeatedly washed several times, so that large impurities can rinse, and then take out the manifold on the stationary dissolved gas mains, connect and Installation TV type dissolved gas releaser; 
    2. In order to ensure uniformity and proper functioning of the water releaser, releaser position is not maintained when installing light

    Oblique; 
    Even at the branch pipe corrosion rubber and fixed on the compressed air manifold 3. The resistance should be tightening, and guaranteed to withstand 5kgf / cm2 pressure; 
    The vent valve and bleed valve should be fixed in place to facilitate the operation, TV type dissolved gas releaser general should not flip.

     
 
点击这里给我发消息