PRODUCTS

  • Acid mist purification tower
     
     

    With the development of modern industry, to prevent environmental pollution have become the common concern of the people. Comprehensive utilization at the same time, become harmful for beneficial, become useless as useful, is to save investment, save energy and improve the economic benefit of important ways. In a lot of metal surface treatment (pickling, milling, electroplating, etc.) process, the need to use sulfuric acid, hydrochloric acid, nitric acid, etc., which will be a certain concentration of acid fog dissipation gas, the content of acid mist gas exceed standard, to human health, animal and plant growth and buildings will cause serious harm, so countries more and more great attention. I often set in the relevant scientific research units, with the help of, successfully developed a series of BJS, Acid mist purification tower, the purification tower adopts the glass fiber reinforced plastic and polyethylene materials. It has high purification effect, strong corrosion resistance, high strength, low noise, power saving, small volume, convenient dismantling and maintenance, beautiful appearance generous, etc.

    1. The factory is the production of the model is 1.5, 3, 5, 7.5, 10, 20, 30, 40, 50, a total of nine kinds of specifications. The harmful gas of BJS type Acid mist purification tower processing for Acid mist (- H2SO4), hydrochloric Acid (HCL), gas and hydrogen fluoride (HF) gas, chromium Acid mist (GrO3), hydrogen cyanide (HCN), hydrogen sulfide (H2S), ammonia (NH3), water soluble gas such as alkali vapor. By sodium hydroxide to absorb and fluid, 2 ~ 6% solution concentration, purification efficiency were above 95%.

    2. The production, purification tower by subsection tower body surface using water resistant, aging resistant gel coat resin for anti aging surface, gel layer thickness is not less than 0.5 mm, both inside and outside the strength and surface with non-alkali no wax untwisted pane cloth as aging resistance of coating, the resin content of no less than 75%, laying layers by large technology standard requirements, resin content up to 60 ~ 70%, the strength of tower body is absolutely reliable.

     
 
点击这里给我发消息